Removal

BRAKE CONTROL: REAR SPEED SENSOR: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The following procedure is for the LH side.

1. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

Removal

2. REMOVE REAR WHEEL

3. REMOVE REAR SPEED SENSOR

(a) Disconnect the rear speed sensor connector.





(b) Disconnect the grommet of the rear speed sensor wire from the hole in the wheel well.





Text in Illustration





(c) Remove the 2 bolts, No. 1 clamp and No. 2 clamp from the body and absorber.

(d) Remove the bolt and rear speed sensor body from the carrier.





NOTICE:
Keep the sensor tip and rear speed sensor installation hole free from foreign matter.