Installation

AIR CONDITIONING: SOLAR SENSOR: INSTALLATION

1. INSTALL SOLAR SENSOR

(a) Engage the 2 claws and install the solar sensor.





(b) Connect the connector.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly

3. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly

5. INSTALL NO. 4 HEATER TO REGISTER DUCT Reassembly

6. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly

7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY Installation

8. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation

9. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation

10. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation

11. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation

12. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation

13. INSTALL FRONT PILLAR GARNISH RH Installation

14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

15. INSTALL FRONT PILLAR GARNISH LH Installation

16. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

17. INSTALL POWER SWITCH Installation

18. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

19. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

20. INSTALL CONSOLE BOX ASSEMBLY Removal

21. INSTALL LOWER REAR CONSOLE BOX Installation

22. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

23. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

24. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

25. INSTALL FRONT DOOR SCUFF PLATE LH Installation

26. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

27. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

28. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

29. INSTALL FRONT DOOR SCUFF PLATE RH Installation

30. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System) Installation

31. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) Installation

32. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

33. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) Installation

34. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) Installation

35. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

36. INSTALL COMBINATION METER ASSEMBLY Installation

37. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

38. POSITION FRONT WHEELS STRAIGHT AHEAD

39. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation

40. INSTALL STEERING COLUMN COVER Installation

41. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation

42. INSTALL STEERING WHEEL ASSEMBLY Installation

43. INSPECT STEERING WHEEL CENTER POINT

44. INSTALL STEERING PAD Installation

45. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

46. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

47. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

48. INSPECT STEERING PAD Installation

49. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Check Mode Procedure.