Removal

PARKING BRAKE: PARKING BRAKE SWITCH: REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable to prevent the airbag working.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

Removal

5. DISCONNECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

Removal

6. DISCONNECT PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Partially remove the front floor carpet.

(b) Disconnect the parking brake switch connector.





(c) Remove the 3 nuts and disconnect the parking brake control pedal assembly from the body.





7. REMOVE PARKING BRAKE SWITCH ASSEMBLY

(a) Remove the screw and parking brake switch assembly from the parking brake control pedal assembly.