Removal

LIGHTING: HEADLIGHT DIMMER SWITCH: REMOVAL

1. POSITION FRONT WHEELS STRAIGHT AHEAD

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

6. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

7. REMOVE STEERING PAD Removal

8. REMOVE STEERING WHEEL ASSEMBLY Removal

9. REMOVE STEERING COLUMN COVER Removal

10. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR Removal

11. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY Removal

12. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Disconnect the connector.





(b) Disengage the clamp as shown in the illustration.

(c) Disengage the claw and remove the headlight dimmer switch assembly as shown in the illustration.