Removal

HORN: STEERING PAD SWITCH: REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Diagnosis System.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

6. REMOVE STEERING PAD Removal

7. REMOVE STEERING PAD SWITCH ASSEMBLY

(a) Disconnect the pad switch connector from the spiral cable.





(b) Remove the screw.

(c) Disengage the 2 pins and remove the steering pad switch.

(d) Remove the screw.





(e) Disengage the 2 pins and remove the steering pad switch assembly.