Transmission Position Sensor/Switch: Testing and Inspection

P313 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER POSITION SENSOR: INSPECTION

1. INSPECT SHIFT LEVER POSITION SENSOR

(a) Measure the resistance according to the value(s) in the table below.





Text in Illustration





Standard Resistance (Check for Open):





Standard Resistance (Check for Short):





If the result is not as specified, replace the shift lever position sensor.

NOTICE:
*1: The resistance between terminals B50-8 (+B) and B50-2 (N) should be between 4.2 and 5.2 kOhms.