Reading and Clearing Diagnostic Trouble Codes

POWER STEERING: POWER STEERING SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Read the DTCs by following the prompts on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) Check the details of the DTCs Power Steering System.

2. CLEAR DTC

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Clear the DTCs by following the prompts on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) According to the display on the Techstream, select the trouble code data display with the clear button.

(g) Turn the ignition switch off.

(h) Disconnect the Techstream from the DLC3.