Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE DECK TRIM SERVICE HOLE COVER

3. REMOVE SPARE TIRE

4. REMOVE REAR WHEELS

5. REMOVE TAIL EXHAUST PIPE ASSEMBLY Removal

6. REMOVE REAR STABILIZER LINK ASSEMBLY LH

(a) Remove the nut and separate the rear stabilizer link assembly LH from the rear stabilizer bar.





HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

(b) Remove the nut and the rear stabilizer link assembly LH from the rear shock absorber with coil spring LH.





HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

7. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT
Perform the same procedure as the LH side.

8. REMOVE REAR STABILIZER BAR BRACKET LH (for Rear Side)

(a) Remove the 2 bolts and the rear stabilizer bar bracket LH (rear side).





9. REMOVE REAR STABILIZER BAR BRACKET RH (for Rear Side)

(a) Remove the 2 bolts and the rear stabilizer bar bracket RH (rear side).





10. REMOVE REAR STABILIZER BUSHING (for LH Side)

(a) Remove the rear stabilizer bushing (LH side).





11. REMOVE REAR STABILIZER BUSHING (for RH Side)

(a) Remove the rear stabilizer bushing (RH side).





12. REMOVE REAR STABILIZER BAR BRACKET LH (for Front Side)

(a) Remove the bolt and the rear stabilizer bar bracket LH (front side).





13. REMOVE REAR STABILIZER BAR BRACKET RH (for Front Side)

(a) Remove the 2 bolts and the rear stabilizer bar bracket RH (front side).





14. REMOVE REAR STABILIZER BAR