How To Proceed With Troubleshooting

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use the following procedures to troubleshoot the intuitive parking assist system.
* *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

NEXT -- Continue to next step.

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Result





B -- Go to CAN COMMUNICATION SYSTEM Service Precautions
A -- Continue to next step.

4. CHECK DTC OUTPUT

(a) Check for DTCs Intuitive Parking Assist System.

(b) Clear the DTCs Intuitive Parking Assist System.

(c) Recheck for DTCs Intuitive Parking Assist System.

Result





B -- Go to DIAGNOSTIC TROUBLE CODE CHART Intuitive Parking Assist System
A -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table Intuitive Parking Assist System.

Result





B -- Go to step 7
A -- Continue to next step.

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check Operation Check.

(b) Terminals of ECU Intuitive Parking Assist System.

(c) Data List / Active Test Intuitive Parking Assist System.

NEXT -- Continue to next step.

7. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

8. CONFIRMATION TEST

NEXT -- END