Rear View Monitor System (w/o Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

1. CHECK REAR TELEVISION CAMERA ASSEMBLY





(a) Disconnect the S5 camera connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the S5 camera connector.

(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.

(e) Using an oscilloscope, check waveform 1.





Waveform 1 (Reference)





2. CHECK MULTI-DISPLAY Pinout Values and Diagnostic Parameters