Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly
- Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly

DESCRIPTION

This is the display signal circuit from the display and navigation module display to the television display assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NAVIGATION ECU - TELEVISION DISPLAY)

(a) Disconnect the F49 display and navigation module display connector.

(b) Disconnect the L34 television display assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table