Sound Signal Circuit between Multi-media Interface ECU and Video Terminal

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Sound Signal Circuit between Multi-media Interface ECU and Video Terminal
- Sound Signal Circuit between Multi-media Interface ECU and Video Terminal

DESCRIPTION

This is the sound signal circuit from the video terminal to the multi-media interface ECU.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (VIDEO TERMINAL - MULTI-MEDIA INTERFACE ECU)

(a) Disconnect the P1 video terminal connector.

(b) Disconnect the L37 multi-media interface ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table