Operation CHARM: Car repair manuals for everyone.

Mute Signal Circuit Between Stereo Component Amplifier and Telematics Transceiver





AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): Mute Signal Circuit between Stereo Component Amplifier and Telematics Transceiver
- Mute Signal Circuit between Stereo Component Amplifier and Telematics Transceiver

DESCRIPTION

The telematics transceiver sends a mute signal to the stereo component amplifier assembly.

The stereo component amplifier assembly controls the volume according to the mute signal from the telematics transceiver.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT STEREO COMPONENT AMPLIFIER ASSEMBLY

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





NG -- CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - TELEMATICS TRANSCEIVER)

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

2. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - TELEMATICS TRANSCEIVER)

(a) Disconnect the F42 stereo component amplifier assembly connector and P2 telematics transceiver connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. INSPECT TELEMATICS TRANSCEIVER

(a) Reconnect the P2 telematics transceiver connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





NG -- REPLACE TELEMATICS TRANSCEIVER Removal

OK -- REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY Removal