Installation

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (w/o Cool Box): INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY





(a) Attach the 2 claws.

(b) Install the console box with the 4 bolts and 2 screws.

2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

(a) Connect the connectors and 2 clamps.





(b) Attach the 8 claws to install the end panel.

3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Connect the connectors.





(b) Attach the 14 claws to install the console panel.

4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

(a) Attach the 4 claws to install the box.





5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Attach the 9 claws to install the panel.





6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Connect the connectors.





(b) Attach the 7 claws to install the panel.

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Install the shift lever knob and twist it in the direction indicated by the arrow.





8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

(a) Attach the 7 claws to install the panel pad.





(b) Install the screw.

(c) Install the clip.

9. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

(a) Attach the 7 claws to install the panel cushion.





10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

(a) Connect the connectors and 2 clamps.





(b) Attach the 8 claws to install the panel pad.

(c) Install the screw.

(d) Install the clip.

11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

(a) Attach the 7 claws to install the panel cushion.