Removal

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (w/o Cool Box): REMOVAL

1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

(a) Place protective tape as shown in the illustration.





(b) Using a moulding remover, detach the 7 claws and remove the panel cushion.

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

(a) Remove the clip.





(b) Remove the screw.

(c) Detach the 8 claws.

(d) Remove the panel pad and disconnect the connectors and 2 clamps.

3. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

(a) Place protective tape as shown in the illustration.





(b) Using a moulding remover, detach the 7 claws and remove the panel cushion.

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

(a) Remove the clip.





(b) Remove the screw.

(c) Detach the 7 claws and remove the panel.

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Twist the shift lever knob in the direction indicated by the arrow and remove it.





6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Detach the 7 claws.





(b) Disconnect the connectors and remove the panel.

7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Detach the 9 claws and remove the panel.





8. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

(a) Detach the 4 claws and remove the box.





9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Detach the 14 claws.





(b) Disconnect the connectors and remove the console panel.

10. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

(a) Place protective tape as shown in the illustration.





(b) Using a moulding remover, detach the 8 claws.

(c) Remove the end panel and disconnect the connectors and 2 clamps.

11. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY





(a) Remove the 4 bolts and 2 screws.

(b) Detach the 2 claws and remove the console box.