Installation

MIRROR (EXT): OUTER REAR VIEW MIRROR: INSTALLATION

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY





(a) Attach the claw to install the mirror.

(b) Install the 3 nuts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Attach the clamp.

(d) Connect the connector.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

3. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH Reassembly

4. INSTALL DOOR ASSIST GRIP COVER Reassembly

5. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY Installation

6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL Reassembly