Installation

EXTERIOR PANELS / TRIM: ROOF CARRIER: INSTALLATION

1. INSTALL ROOF CARRIER ASSEMBLY

(a) Clean the threaded surface on the vehicle body with a non-residue solvent.

(b) Apply adhesive to the threads of the 10 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(c) Install the roof carrier with the 10 bolts.

for labeled A - Torque : 39 Nm (398 kgf-cm, 29 ft-lbf)

for labeled B - Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)

(d) Adjust the roof rack support position and tighten the roof carrier caps.





2. INSTALL REAR ROOF RACK LEG COVER LH





(a) Attach the 2 guides and 4 claws to install the cover.

3. INSTALL REAR ROOF RACK LEG COVER RH

HINT
Use the same procedures described for the LH side.

4. INSTALL CENTER ROOF RACK LEG COVER LH





(a) Attach the 2 claws to install the cover.

5. INSTALL CENTER ROOF RACK LEG COVER RH

HINT
Use the same procedures described for the LH side.

6. INSTALL FRONT ROOF RACK LEG COVER LH





(a) Attach the 2 guides and 4 claws to install the cover.

7. INSTALL FRONT ROOF RACK LEG COVER RH

HINT
Use the same procedures described for the LH side.