Disassembly

3UR-FE FUEL: FUEL PUMP: DISASSEMBLY

NOTICE:
Do not disconnect the hoses indicated in the illustration.





1. REMOVE FUEL SENDER GAUGE ASSEMBLY Removal

2. REMOVE NO. 1 FUEL SUB-TANK

(a) Disconnect the fuel pump connector.





(b) Disconnect the jet pump from the sub-tank.





(c) Using a small screwdriver, detach the claw from the sub-tank.

HINT
Tape the screwdriver tip before use.

(d) Detach the tube from the 2 clamps on the sub-tank.

(e) Using a screwdriver, detach the 3 claws from the claw holes.





NOTICE:
Do not damage the fuel sub-tank.

HINT
Tape the screwdriver tip before use.

(f) Using a screwdriver, detach the 3 claws from the claw holes and remove the No. 1 fuel sub-tank.





NOTICE:
Do not damage the fuel sub-tank.

HINT
Tape the screwdriver tip before use.

3. REMOVE FUEL PUMP

(a) Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the suction plate with filter.





HINT
Tape the screwdriver tip before use.

(b) Disconnect the fuel pump wire harness connector from the fuel pump to remove it.





(c) Remove the O-ring and spacer from the fuel pump.





4. REMOVE FUEL MAIN VALVE ASSEMBLY

(a) Remove the fuel main valve from the fuel filter.





(b) Remove the 2 O-rings from the fuel main valve.

5. REMOVE NO. 1 FUEL SUCTION SUPPORT

(a) Detach the 2 claws from the claw holes to remove the fuel suction support.