Reassembly

3UR-FE FUEL: FUEL PUMP: REASSEMBLY

NOTICE:
Do not disconnect the hoses indicated in the illustration.





1. INSTALL NO. 1 FUEL SUCTION SUPPORT

(a) Attach the 2 claws to the claw holes to install the fuel suction support.





2. INSTALL FUEL MAIN VALVE ASSEMBLY

(a) Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.





(b) Install the fuel main valve to the fuel filter.





NOTICE:
Make sure the O-rings are not cut or pinched during the installation.

3. INSTALL FUEL PUMP

(a) Connect the fuel pump wire harness connector to the fuel pump.





(b) Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.





(c) Attach the 5 claws to the claw holes and install the fuel pump to the suction plate with filter.





4. INSTALL NO. 1 FUEL SUB-TANK

NOTICE:
Make sure that the fuel tube passes into the section marked by the circle.





(a) Attach the 3 claws to the claw holes to install the fuel sub-tank.





(b) Attach the 3 claws to the claw holes.





(c) Install the tube part to the sub-tank.





(1) Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the sub-tank.

(d) Connect the jet pump to the sub-tank.

(e) Connect the fuel pump connector.





5. INSTALL FUEL SENDER GAUGE ASSEMBLY Installation