Removal

3UR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the sensor connector.

(b) Using a 19 mm deep socket wrench, remove the sensor.

(c) Remove the gasket from the sensor.