Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: REAR AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE REAR NO. 2 SEAT ASSEMBLY LH Removal

3. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE Removal

4. REMOVE REAR STEP COVER Removal

5. REMOVE REAR DOOR SCUFF PLATE LH Removal

6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Removal

7. REMOVE REAR SEAT COVER CAP Removal

8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH Removal

9. REMOVE REAR AIRBAG SENSOR

(a) Remove the bolt and rear airbag sensor.





(b) Disconnect the connector.