Rear View Monitor System (w/ Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Navigation System): TERMINALS OF ECU

1. CHECK TELEVISION CAMERA ASSEMBLY





(a) Disconnect the V17 camera connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the V17 camera connector.

(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.

(e) Using an oscilloscope, check the waveform.





Measurement Condition





2. CHECK NAVIGATION RECEIVER ASSEMBLY (w/ USB Audio System) Navigation System (w/ USB Audio System)

3. CHECK NAVIGATION RECEIVER ASSEMBLY (w/o USB Audio system) Navigation System (w/o USB Audio System)