Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

1. INSTALL NO. 2 RADIO BRACKET (w/o USB Audio System)

(a) Install the bracket with the 4 bolts.

Torque : 4.5 Nm (45 kgf-cm, 39 in-lbf)

2. INSTALL NO. 1 RADIO BRACKET (w/o USB Audio System)

(a) Install the bracket with the 4 bolts.

Torque : 4.5 Nm (45 kgf-cm, 39 in-lbf)

3. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL (w/o USB Audio System)

(a) Install the upper instrument cluster finish panel with the 4 screws.

4. INSTALL NAVIGATION RECEIVER ASSEMBLY (w/o USB Audio System)

(a) Connect the connectors.

(b) Insert the navigation receiver as shown in the illustration to engage the 2 clips on its backside.

NOTICE:
When inserting the navigation receiver, do not press the knobs on it.

5. INSTALL NO. 2 RADIO BRACKET (w/ USB Audio System)

(a) Install the bracket with the 4 bolts.

6. INSTALL NO. 1 RADIO BRACKET (w/ USB Audio System)

(a) Install the bracket with the 4 bolts.

7. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ USB Audio System)

(a) Connect the connectors.

(b) Insert the navigation receiver as shown in the illustration to engage the 3 clips on its backside.

NOTICE:
When inserting the navigation receiver, do not press the knobs on it.

8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

9. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL Installation

10. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

11. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

14. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation

15. INSTALL INSTRUMENT SIDE PANEL LH Installation

16. INSTALL COWL SIDE TRIM BOARD LH Installation

17. INSTALL FRONT DOOR SCUFF PLATE LH Installation