Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

1. REMOVE FRONT END PANEL LH (w/o Headlight Cleaner System) Removal

2. REMOVE FRONT END PANEL RH (w/o Headlight Cleaner System)

HINT
Use the same procedure described for the LH side.

3. REMOVE FRONT END PANEL LH (w/ Headlight Cleaner System) Removal

4. REMOVE FRONT END PANEL RH (w/ Headlight Cleaner System)

HINT
Use the same procedure described for the LH side.

5. REMOVE FRONT BUMPER COVER

(a) Apply protective tape as shown in the illustration.





(b) Using a screwdriver, turn each pin hold clip 90° remove the 2 pin hold clips.

HINT
Use the same procedure for the RH side and LH side.





(c) Using a clip remover, remove the clip.

HINT
Use the same procedure for the RH side and LH side.

(d) Remove the screw.

HINT
Use the same procedure for the RH side and LH side.

(e) Remove the 8 clips.





(f) Remove the 7 screws.

(g) Detach the 4 claws and remove the front bumper cover.





(h) Disconnect the connectors.

HINT
This procedure is only necessary for vehicles equipped with fog lights or the intuitive parking assist system.