Disassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: DISASSEMBLY

1. REMOVE REFLEX REFLECTOR ASSEMBLY LH





(a) Remove the nut and reflex reflector.

2. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

3. REMOVE REAR BUMPER LOWER COVER (w/o Towing Hitch)





(a) Remove the rear bumper lower cover.

NOTICE:
Remove any tape remaining on the cover side.

4. REMOVE REAR BUMPER LOWER COVER (w/ Towing Hitch)





(a) Remove the rear bumper lower cover.

NOTICE:
Remove any tape remaining on the cover side.

5. REMOVE GROMMET





(a) Remove the 6 grommets.

6. REMOVE NO. 2 FRAME WIRE (w/ Intuitive Parking Assist System)





(a) Disconnect the 4 connectors.

(b) Disconnect the 6 clamps and No. 2 frame wire.

7. REMOVE NO. 1 ULTRASONIC SENSOR Removal

8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER Removal

9. REMOVE NO. 2 ULTRASONIC SENSOR Removal

10. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER Removal

11. REMOVE REAR BUMPER UPPER RETAINER LH





(a) Remove the 3 screws.

(b) Disengage the 4 claws and remove the rear bumper upper retainer.

12. REMOVE REAR BUMPER UPPER RETAINER RH

HINT
Use the same procedure as for the LH side.

13. REMOVE REAR BUMPER END RETAINER LH





(a) Remove the screw.

(b) Disengage the 2 claws and remove the rear bumper end retainer.

14. REMOVE REAR BUMPER END RETAINER RH

HINT
Use the same procedure as for the LH side.

15. REMOVE REAR BUMPER ENERGY ABSORBER





(a) Remove the rear bumper energy absorber.

16. REMOVE REAR FLOOR STAY BRACKET LH





(a) Remove the 2 bolts and rear floor stay bracket.

17. REMOVE REAR FLOOR STAY BRACKET RH

HINT
Use the same procedure as for the LH side.

18. REMOVE REAR BUMPER ARM BRACKET LH





(a) Remove the 2 bolts and rear bumper arm brackets.

19. REMOVE REAR BUMPER ARM BRACKET RH

HINT
Use the same procedure as for the LH side.

20. REMOVE REAR BUMPER BAR BRACKET LH





(a) Remove the bolt and rear bumper bar bracket.

21. REMOVE REAR BUMPER BAR BRACKET RH

HINT
Use the same procedure as for the LH side.