Installation

DOOR / HATCH: BACK DOOR OPENER SWITCH: INSTALLATION

1. INSTALL BACK DOOR OUTSIDE HANDLE

(a) Install the back door outside handle with the 2 bolts.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Engage the clamp.

(c) Connect the connector.

2. INSTALL BACK DOOR SERVICE HOLE COVER Reassembly

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Reassembly

4. INSTALL BACK DOOR PULL STRAP Reassembly

5. INSTALL BACK DOOR STRAP COVER Reassembly

6. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

7. BACK DOOR SIDE GARNISH RH Reassembly

8. INSTALL BACK DOOR CENTER GARNISH Reassembly

9. INSTALL POWER BACK DOOR ROD (w/ Power Back Door) Reassembly