Reassembly

HEATING / AIR CONDITIONING: CONDENSER (w/o Air Cooled Transmission Oil Cooler): REASSEMBLY

1. INSTALL COOLER DRYER

(a) Using pliers, install the cooler dryer onto the modulator.





(b) Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.





Compressor oil:

ND-OIL 8 or equivalent

(c) Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.





Torque : 2.9 Nm (30 kgf-cm, 26 in-lbf)

2. INSTALL NO. 2 COOLER CONDENSER CUSHION

(a) Install the 2 cushions to the cooler condenser.





3. INSTALL NO. 1 COOLER CONDENSER CUSHION

(a) Install the collar to the cushions.





(b) Install the 2 cushions to the cooler condenser.