Installation

1UR-FE FUEL: FUEL PUMP: INSTALLATION

1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

(a) Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.





(b) Align the protrusion of the pump and gauge tube with the groove of the fuel tank.

(c) Install the fuel suction with pump and gauge tube into the fuel tank.

NOTICE:
Be careful not to bend the arm of the fuel sender gauge.

(d) Put the retainer on the fuel tank. While holding the fuel suction with pump and gauge tube, tighten the retainer one complete turn by hand.

(e) Using SST, tighten the retainer until the retainer mark is within range A on the fuel tank, as shown in the illustration.





SST : 09808-14020

HINT
Fit the tips of SST onto the ribs of the retainer.

(f) Install the 2 fuel tank tubes with the 2 tube joint clips.





NOTICE:





* Check that there are no scratches or foreign objects on the connecting parts.
* Check that the fuel tube joints are inserted securely.
* Check that the tube joint clips are on the collars of the fuel tube joints.
* After installing the tube joint clips, check that the fuel tube joints have not been pulled off.

2. INSTALL FUEL TANK ASSEMBLY

(a) Install the fuel tank Installation.