Removal

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic Steering Column): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
* After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
* Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE UPPER STEERING COLUMN COVER

(a) Remove the 2 screws.

HINT
Turn the steering wheel to the right and left as necessary to remove the 2 screws.

(b) Detach the 4 clips.

(a) Detach the 2 claws to remove the lower steering column cover.

4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Removal

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY Removal

7. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY Removal

8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

(a) Disconnect the 2 ECU connectors.

(b) Remove the 2 screws and ECU.