Removal

DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Luggage Compartment): REMOVAL

1. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

2. REMOVE LUGGAGE COMPARTMENT TRIM BOX Removal

3. REMOVE ROPE HOOK ASSEMBLY Removal

4. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY Removal

5. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY Removal

6. REMOVE DECK BOARD BRACKET Removal

7. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)

(a) Remove the rear No. 2 seat assembly LH Removal.

8. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)

(a) Remove the rear No. 2 seat assembly LH Removal.

9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER LH Removal

10. REMOVE REAR FLOOR STEP NO. 1 COVER Removal

11. REMOVE REAR FLOOR STEP NO. 2 COVER Removal

12. REMOVE REAR DOOR SCUFF PLATE LH Removal

13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal

14. REMOVE ROPE HOOK ASSEMBLY Removal

15. REMOVE REAR FLOOR MAT SUPPORT PLATE Removal

16. REMOVE QUARTER TRIM PANEL ASSEMBLY LH Removal

17. REMOVE QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) Removal

18. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH Removal

19. REMOVE BACK DOOR CONTROL SWITCH

(a) Remove the screw.

(b) Using a screwdriver with its tip wrapped in protective tape, engage the claw and remove the No. 3 side trim base with back door control switch from the rear window side garnish assembly LH.





(c) Using a screwdriver with its tip wrapped in protective tape, engage the 4 claws and remove the back door control switch from the No. 3 side trim base.