Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: REAR AIRBAG SENSOR: REMOVAL
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal
3. REMOVE LUGGAGE COMPARTMENT TRIM BOX Removal
4. REMOVE ROPE HOOK ASSEMBLY Removal
5. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY Removal
6. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY Removal
7. REMOVE DECK BOARD BRACKET Removal
8. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
(a) for Manual seat:
Remove the rear No. 2 seat assembly RH Removal
(b) for Power Seat:
Remove the rear No. 2 seat assembly RH Removal
9. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
(a) for Manual seat:
Remove the rear No. 2 seat assembly LH Removal
(b) for Power Seat:
Remove the rear No. 2 seat assembly LH Removal
10. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH Removal
11. REMOVE REAR SEAT CUSHION HINGE LOWER COVER LH Removal
12. REMOVE REAR FLOOR STEP NO. 1 COVER Removal
13. REMOVE REAR FLOOR STEP NO. 2 COVER Removal
14. REMOVE REAR DOOR SCUFF PLATE RH Removal
15. REMOVE REAR DOOR SCUFF PLATE LH Removal
16. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH Removal
17. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal
18. REMOVE ROPE HOOK ASSEMBLY Removal
19. REMOVE REAR FLOOR MAT SUPPORT PLATE Removal
20. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Standard) Removal
21. REMOVE QUARTER TRIM PANEL ASSEMBLY LH (for Standard) Removal
22. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) Removal
23. REMOVE QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) Removal
24. REMOVE REAR SIDE NO. 3 AIR DUCT Removal
25. REMOVE REAR AIRBAG SENSOR RH
(a) Disconnect the connector from the rear airbag sensor.
NOTICE:
Disconnect the connector with the rear airbag sensor installed.
(b) Remove the bolt.
(c) Disengage the guide and remove the rear airbag sensor.
26. REMOVE REAR AIRBAG SENSOR LH
HINT
Use the same procedure as for the RH side.