Ball Joint

FRONT NO. 1 SUSPENSION ARM LOWER SUB-ASSEMBLY LH

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

Standard turning torque 3.0 to 10.0 N*m (31 to 102 kgf*cm, 27 to 89 in.*lbf)


FRONT SUSPENSION UPPER ARM ASSEMBLY LH

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per 1 turn and take the torque reading on the fifth turn.

Standard turning torque 0.98 to 4.41 N*m (1.0 to 45 kgf*cm, 9 to 39 in.*lbf)