Installation

SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: INSTALLATION

1. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET





(a) Install the height control compressor bracket with the 3 bolts.

Torque : 5.9 Nm (60 kgf-cm, 52 in-lbf)

(b) Connect the wire harness clamps.





2. INSTALL HEIGHT CONTROL FILTER





(a) Install the height control filter with the 2 bolts.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(b) Connect the 2 hoses.

3. INSTALL HEIGHT CONTROL NO. 1 COMPRESSOR





(a) Install the height control compressor with the 3 bolts.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

(b) Connect the height control tube Suspension Control System.

(c) Connect the 2 wire harness connectors.

(d) Connect the hoses with 4 new clips.

(e) Install the compressor cover with 3 new clips.

4. INSTALL REAR BUMPER COVER

Installation