Back Door Glass Goes Down During Auto Up Operation

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: Back Door Glass goes Down During Auto Up Operation
- Back Door Glass goes Down During Auto Up Operation

DESCRIPTION

If the door glass or the power window regulator does not smoothly operate, the jam protection function may operate abnormally, resulting in this symptom.

INSPECTION PROCEDURE

PROCEDURE

1. PERFORM INITIALIZATION

(a) Initialize the back door window regulator motor Initialization.

(b) Check that the AUTO UP/DOWN function operates normally.

OK:

Back door power window AUTO UP/DOWN operates normally.

NG -- CHECK BACK DOOR POWER WINDOW REGULATOR MOTOR ASSEMBLY

OK -- END

2. CHECK BACK DOOR POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Remove the back door glass.

(b) Operate the power window regulator via the back door power window switch while the back door glass is not installed.

(c) Check that the power window regulator operates smoothly.

OK:

Power window moves smoothly.

NG -- REPLACE BACK DOOR POWER WINDOW REGULATOR MOTOR Disassembly

OK -- REPLACE BACK DOOR GLASS RUN