Wiper and Washer Systems: Service Precautions

WIPER / WASHER: WIPER AND WASHER SYSTEM: PRECAUTION

1. WASHER NOZZLE ADJUSTMENT PRECAUTION

(a) Do not clean or adjust the washer nozzle using objects such as needles or safety pins, because;

(1) The washer nozzle tip is made of resin and could be damaged.

(2) Adjustment is not necessary as the washer nozzle is a spray type.

(b) If the washer nozzle is clogged with substances such as car wax, remove it and clean the nozzle hole with a soft resin brush or similar tool.

2. REAR WIPER AND WASHER OPERATION

(a) When the following conditions are satisfied, rear wiper and washer are driven.

* Ignition switch is ON

* Back door power window is initialized Initialization.

* Back door power window glass is in fully closed condition.

* Back door power window regulator switch or tail gate control switch is not operated*.

HINT
*: This condition is for the rear wiper only.