Operation CHARM: Car repair manuals for everyone.

Meter / Gauge System





METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: SYSTEM DIAGRAM









Communication Table





* *1: for 4WD

* *2: w/ Air Suspension

* *3: w/ Towing Package

* *4: w/ Dynamic Laser Cruise Control System

* *5: for U.S.A.

* *6: except U.S.A.






SYSTEM DESCRIPTION

1. METER GAUGE AND WARNING INDICATOR

Meter/Gauge





* *1: w/ A/T Oil Temperature Receiver Gauge

Warning/Indicator









* *1: for U.S.A.

* *2: except U.S.A.

* *3: for 4WD

* *4: for U.S.A. without Multi-information Display

* *5: w/o Multi-information Display

* *6: w/ Towing Package

* *7: w/ Multi-information Display

* *8: w/ Air Suspension

2. MULTI-INFORMATION DISPLAY (w/ Multi-information display)

When the INFO switch is pressed, the multi-information display is changed between the following: cruise information display, warning display.

(a) Cruise information display:

The cruise information is displayed in the following order each time the INFO switch is pressed.









(b) Warning display:

When a warning is necessary, the warning display interrupts the multi-information display.

* The master warning light may illuminate or blink and buzzer may sound depending on the item in the multi-information display.









3. ACCESSORY METER

(a) This system has the following functions.

(1) Clock:

When the ignition switch is turned ON or ACC, the clock display is ON.

(2) Cruise Information:

For cruise information, four type of information (Outside temperature, average fuel economy, instant fuel economy, and distance to empty) can be displayed.

* The cruise information units can be changed by using the SETUP switch.

* Outside temperature -> Average fuel economy -> Instant fuel economy -> Distance to empty.





(3) Security Indicator Light:

* Informs the driver of the theft deterrent system status.

* Depending on operation of the transponder key ECU, the interior security indicator light comes on or starts blinking.

(4) Clearance Warning Indicator:

* Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.

* Turns on and off according to the intuitive parking assist system status.

* Emits an intermittent sound to inform the driver that the ECU has detected an obstacle within the prescribed ranges.