Installation

LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR LIGHT ASSEMBLY

(a) Engage the clip and install the rear light.





(b) Tighten the 2 nuts.

Torque : 6.4 Nm (65 kgf-cm, 56 in-lbf)

(c) Connect the connector.

2. INSTALL BACK DOOR SERVICE HOLE COVER Reassembly

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Reassembly

4. INSTALL BACK DOOR PULL STRAP Reassembly

5. INSTALL BACK DOOR STRAP COVER Reassembly

6. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

7. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

8. INSTALL BACK DOOR CENTER GARNISH Reassembly