Installation

3UR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL FAN & GENERATOR V BELT

(a) Set the fan and generator V belt onto every part.





(b) While turning the belt tensioner counterclockwise, remove the pin.

NOTICE:
Make sure that the V belt is properly set to each pulley.





(c) After installing the belt, check that it fits properly in the ribbed grooves.

HINT
Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.

2. INSTALL NO. 1 ENGINE UNDER COVER Replacement

3. INSTALL V-BANK COVER SUB-ASSEMBLY Installation