Power Window Master Switch

WINDOW / GLASS: POWER WINDOW MASTER SWITCH: INSPECTION

1. INSPECT POWER WINDOW MASTER SWITCH

(a) Check the resistance.





(1) Measure the resistance according to the value(s) in the table below.

HINT
Window motors other than the driver MANUAL and rear seat window motors use LIN communication, and therefore this inspection cannot be performed for those windows.

Standard Resistance:

Driver Switch





If the result is not as specified, replace the power window master switch.

Standard Resistance:

Rear LH Side Switch





If the result is not as specified, replace the power window master switch.

Standard Resistance:

Rear RH Side Switch





If the result is not as specified, replace the power window master switch.

(b) Check the illumination operation.

(1) Apply battery voltage to the power window master switch and check that the illumination comes on.

OK:





If the result is not as specified, replace the power window master switch.