Installation

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Engage the 2 claws and install the certification ECU.





2. INSTALL ECU INTEGRATION BOX RH

(a) Install the ECU integration box with the 2 nuts and bolt.

(b) Engage the clamp.

HINT
If the vehicle is equipped with a wire harness clamp, engage the clamp.

(c) Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM BOARD RH Installation

5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REGISTER KEY

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform registration Engine Immobiliser System (w/ Smart Key System).

9. REGISTER ECU COMMUNICATION ID

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform registration Engine Immobiliser System (w/ Smart Key System).