Installation

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY

(a) Pushing the front door outside handle in the direction of the arrow as mark shown in the illustration, install the front door outside handle.





(b) Pull down the door handle holder as shown by the arrow and lock the front door outside handle.





(c) Connect the connector.

(d) Engage the 4 claws and install the connector cover.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Driver Side) Reassembly

4. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Reassembly

5. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY Reassembly

6. INSTALL FRONT DOOR GLASS RUN Reassembly

7. INSTALL FRONT DOOR WEATHERSTRIP Reassembly

8. INSTALL FRONT DOOR CHECK ASSEMBLY Reassembly

9. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

HINT
Use the same procedure as for the LH side Installation.

10. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

HINT
Use the same procedure as for the LH side .

11. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly

12. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory) Installation

13. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

14. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH Reassembly

15. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly

16. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY Reassembly