How To Proceed With Troubleshooting

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use the following procedures to troubleshoot the intuitive parking assist system.
* *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

NEXT -- Continue to next step.

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Result





B -- Go to CAN COMMUNICATION SYSTEM How to Proceed With Troubleshooting
A -- Continue to next step.

4. CHECK DTC OUTPUT*

(a) Check for DTCs Intuitive Parking Assist System.

(b) Clear the DTCs Intuitive Parking Assist System.

(c) Recheck for DTCs Intuitive Parking Assist System.

Result





B -- Go to DIAGNOSTIC TROUBLE CODE CHART Intuitive Parking Assist System
A -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table Intuitive Parking Assist System.

Result





B -- Go to step 7
A -- Continue to next step.

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check Operation Check.

(b) Terminals of ECU Intuitive Parking Assist System.

(c) Data List / Active Test Intuitive Parking Assist System.

NEXT -- Continue to next step.

7. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

8. CONFIRMATION TEST

NEXT -- END