Rear View Monitor System (w/o Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

1. CHECK REAR TELEVISION CAMERA ASSEMBLY





(a) Disconnect the W8 rear television camera assembly connector.

(b) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the W8 rear television camera assembly connector.

(d) Measure the resistance and waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.

(e) Using an oscilloscope, check waveform 1.





Waveform 1 (Reference)





2. CHECK ACCESSORY METER ASSEMBLY (w/o Navigation System) Meter / Gauge System

3. CHECK NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) Navigation System (w/o USB Audio System)