Operation Check
MIRROR (EXT): POWER MIRROR CONTROL SYSTEM (w/ Memory): OPERATION CHECK
1. CHECK REMOTE CONTROL MIRROR FUNCTION
(a) Turn the engine switch on (IG).
(b) With the mirror select switch set to L, check that the mirror surface moves up, down, left and right normally.
(c) With the mirror select switch set to R, check that the mirror surface moves up, down, left and right normally.
2. CHECK POWER RETRACT MIRROR FUNCTION
(a) Turn the engine switch on (IG).
(b) While both mirrors are in the driving position, press the mirror retract switch.
(c) Check that both mirrors move to the retracted position.
(d) After both mirrors are retracted, press the mirror retract switch.
(e) Check that both mirrors move to the driving position.
3. CHECK MEMORY AND REACTIVATION FUNCTION
HINT
The SET, M1 and M2 seat memory switches are shown in the illustration.
(a) Turn the engine switch on (IG) and move the shift lever to P.
Text in Illustration
(b) Check the M1 switch.
(1) Using the mirror adjust switch assembly, turn the mirror surface to the full left position.
Text in Illustration
(2) Check that the buzzer sounds for 0.5 seconds and the seat position is memorized when the M1 switch is pressed within 3 seconds after the SET switch is pressed.
NOTICE:
* The mirror surface position will also be stored when the M1 switch is pressed after first pressing and holding the SET switch.
* The mirror surface position will not be stored when the SET switch and M1 switch are pressed simultaneously.
* The mirror surface position will not be stored when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.
(3) Using the outer mirror switch assembly, turn the mirror surface to the full right position.
(4) Press the M1 switch.
(5) Check that the buzzer sounds for 0.1 seconds and the outer mirror automatically moves to the recorded full left position.
(c) Check the M2 switch.
(1) Using the mirror adjust switch assembly, turn the mirror surface to the full right position.
Text in Illustration
(2) Check that the buzzer sounds for 0.5 seconds and the seat position is memorized when the M2 switch is pressed within 3 seconds after the SET switch is pressed.
NOTICE:
* The mirror surface position will also be stored when the M2 switch is pressed after first pressing and holding the SET switch.
* The mirror surface position will not be stored when the SET switch and M2 switch are pressed simultaneously.
* The mirror surface position will not be stored when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.
(3) Using the outer mirror switch assembly, turn the mirror surface to the full left position.
(4) Press the M2 switch.
(5) Check that the buzzer sounds for 0.1 seconds and the outer mirror automatically moves to the recorded full right position.
4. CHECK POWER RETRACTABLE MIRROR FUNCTION
(a) Turn the engine switch on (IG).
(b) At each outer rear view mirror position, check the retractable mirror operation when operating the outer mirror retract switch.
(1) Move the mirrors to the driving position.
(2) Turn the outer mirror retract switch to the retract position.
(3) Check that the right and left outer rear view mirrors move from the driving position to the retracted position.
(4) Move the mirrors to the driving position.
(5) Move one of the outer rear view mirrors to the forward position by hand.
(6) Turn the outer mirror retract switch to the retract position.
(7) Check that the outer rear view mirror in the forward position moves to the retracted position, and check that the other mirror moves to the retracted position.
(8) Move the outer rear view mirrors to driving position.
(9) Move one of the outer rear view mirrors to the retracted position by hand.
(10) Turn the outer mirror retract switch to the retract position.
(11) Check that the outer rear view mirror in the driving position moves to the retracted position.
(12) Move the mirrors to the retracted position.
(13) Turn the outer mirror retract switch to the driving position.
(14) Check that the right and left mirrors move from the retracted position to the driving position.
(15) Move the mirrors to the retracted position.
(16) Move one of the outer rear view mirrors to the driving position by hand.
(17) Turn the outer mirror retract switch to the driving position.
(18) Check that the retracted outer rear view mirror moves to the driving position.
(c) Check the operation of the outer rear view mirror according to retract switch operations and engine switch condition.
(1) When the outer rear view mirror is operating, turn the engine switch off and check that the mirror operation stops immediately.
(2) This time, turn the engine switch on (ACC) and press the retract switch. Check that the outer rear view mirror operates in the opposite direction.
(d) Check the operation of the outer rear view mirror when it is blocked by an obstacle.
(1) When the outer rear view mirror is moving to the retracted or driving position, block the outer rear view mirror by hand. Check that the mirror stops moving.
(2) With the outer rear view mirror stopped partway, push the retract switch. Check that the outer rear view mirror moves in the opposite direction.
5. CHECK REVERSE SHIFT-LINKED OPERATION OF MIRRORS
(a) Turn the engine switch on (IG).
(b) Set the mirror select switch to L or R.
Text in Illustration
(c) Check that the mirror surface turns downward when the shift lever is moved to R.
(d) Check that the mirror surface position returns to the original position when one of the following conditions is met:
Shift lever is moved to any position other than R.
Mirror select switch is in the neutral position (off).
Engine switch is turned off.
6. CHECK MEMORY CALL FUNCTION
(a) Automatic memory call function check
(1) With a transmitter key recognition code registered:
Perform a wireless door unlock operation and check that opening the driver side door causes the following:
The buzzer sounds for 0.1 seconds.
The front seat and outer mirror surface position automatically move to stored positions.
HINT
* The registered transmitter key recognition code is recalled automatically.
* If the automatic memory call function is not operated, the buzzer will not sound.
(b) With the engine switch off and the driver side door closed, press and hold the M1 or M2 switch while carrying the transmitter key. The main body ECU will enter transmitter key recognition code registration mode to allow a key to be linked to mirror surface memory position.
HINT
If the memory switch is released before entering registration mode, the memory switch will not enter registration mode.
(c) When the manual door lock switch is pressed, check that the buzzer of the position control ECU and switch assembly sounds once (0.5 seconds).
(d) With the engine switch off and the driver side door closed, press and hold the SET switch while carrying the transmitter key. The main body ECU will enter transmitter key recognition code deletion mode.
HINT
If the memory switch is released before entering deletion mode, the memory switch will not enter deletion mode.
(e) When the manual door lock switch is pressed, check that the buzzer of the position control ECU and switch assembly sounds twice (0.1 seconds each time).
7. EMERGENCY STOP FUNCTION
(a) While a memory call function is operating, check that any one of the following actions will stop the memory call operation: 1) pressing the SET, M1 or M2 switch, 2) moving the shift lever to R, 3) moving the mirror surface manually, or 4) moving the mirror surface to the uppermost, lowermost, left most or right most position.
8. CHECK MIRROR HEATER
(a) Turn the engine switch on (IG).
(b) Check that pressing the rear window defogger switch illuminates the indicator and warms the mirror surface.
(c) Check that after approximately 15 minutes, the indicator light turns off and the mirror heater deactivates.