Power Slide Door ECU RH Power Source Circuit

DOOR / HATCH: POWER SLIDE DOOR SYSTEM: Power Slide Door ECU RH Power Source Circuit
- Power Slide Door ECU RH Power Source Circuit

DESCRIPTION

This circuit provides power to operate the slide door motor unit RH (power slide door ECU RH).

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (ECU RH - BATTERY AND BODY GROUND)

(a) Disconnect the I8 power slide door ECU RH connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Power Slide Door System