Installation

2GR-FE ENGINE CONTROL: VACUUM SWITCHING VALVE (for Engine Mounting): INSTALLATION

1. INSTALL DUTY VACUUM SWITCHING VALVE

(a) Connect the hose to the duty vacuum switching valve.





Text in Illustration





NOTICE:
Confirm that the hose on the front engine mounting insulator side is securely connected.

(b) Install the duty vacuum switching valve with the bolt.

Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)

(c) Connect the 3 vacuum hoses to the duty vacuum switching valve.





Text in Illustration





(d) Connect the duty vacuum switching valve connector.

(e) Engage the wire harness clamp.

2. INSTALL AIR CLEANER INLET COVER ASSEMBLY SEAL Installation