Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the LH side.

1. PRECAUTION

Exterior Lighting System

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT BUMPER COVER

Removal

4. REMOVE HEADLIGHT ASSEMBLY





CAUTION:
For HID-equipped vehicles, when the light control switch is set to HEAD or has recently been set to OFF, the light control ECU can be extremely hot, so make sure that components have cooled down before beginning work.

(a) Remove the bolt and 2 screws.

(b) Disconnect the connectors and then remove the headlight.