Installation

2GR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.





Text in Illustration





(b) Using a 19 mm deep socket wrench, install the engine coolant temperature sensor.

Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT Service and Repair

3. INSPECT FOR COOLANT LEAK Testing and Inspection

4. INSTALL AIR CLEANER AND HOSE Installation

5. INSTALL AIR CLEANER INLET COVER ASSEMBLY SEAL Installation

6. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

7. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Installation

8. INSTALL NO. 1 ENGINE UNDER COVER Installation

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation