LIN Communication System

NETWORKING: LIN COMMUNICATION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use these procedures to troubleshoot the LIN communication system.
* *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

3. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Using the Techstream, inspect the CAN communication function to ensure there are no malfunctions in the communication system Reading and Clearing Diagnostic Trouble Codes.

Result





B -- GO TO CAN COMMUNICATION SYSTEM CAN Communication System
A -- Continue to next step.

4. INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

(a) Using the Techstream, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

Result





B -- GO TO DIAGNOSTIC TROUBLE CODE CHART LIN Communication System
A -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table .

Result





B -- GO TO step 7
A -- Continue to next step.

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Data List / Active Test Scan Tool Testing and Procedures

(b) Terminals of ECU LIN Communication System

NEXT -- Continue to next step.

7. ADJUST, REPAIR OR REPLACE

NEXT -- END