Installation

AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY





(a) Connect the 2 connectors .

(b) Engage the 2 hooks and install the multi-media interface ECU.

(c) Install the 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

HINT
Tighten the bolts in the order shown in the illustration.

(d) Connect the connector .

2. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL ASSEMBLY Installation

3. INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT LOWER CENTER COVER (w/ Console Box) Installation

5. INSTALL INSTRUMENT LOWER CENTER COVER (w/o Console Box) Installation

6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

HINT
Use the same procedure as for the RH side.

8. INSTALL CONSOLE ASSEMBLY (for Slide Type)

Installation

9. INSTALL CONSOLE ASSEMBLY (for Fixed Type)

Installation

10. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

11. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

14. INSTALL NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL Installation

15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

16. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

17. INSTALL COWL SIDE TRIM BOARD RH Installation

18. INSTALL COWL SIDE TRIM BOARD LH

HINT
Use the same procedure as for the RH side.

19. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

20. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

HINT
Use the same procedure as for the RH side.